180-T VDSL2 SFP Modem

Fabricant : Engitech
Modèle : 180-T
Points de fidelité : 0
Disponibilité : 8
Prix : 150,78 CHF
H.T : 140,00 CHF

180-T VDSL2 SFP Modem 

Tested and working in SWITZERLAND (Swisscom and other operators)

Tested in RB3011, HEX S, ... works with no problem (plug and play)


The DSL chipset inside the VDSL2 SFP modem supports all VDSL2 profiles that defined by ITU-T G.993.2. Compliancy with G.994.1 and G.997.1 standards, ensures its interoperability with all existing broadband network services. The 180-T also features the latest ITU standards such as G.inp (G.998.4) and G.vector (G.993.5).

As broadband access technology has evolved rapidly, Service Providers need to upgrade their broadband network service every few years. Traditionally, Service Providers have replaced the entire CPE device in order to provide subscribers with faster Internet services. Not only does it increase their CAPEX and OPEX but also wastes resources and increase inventories. Leveraging 180-T in Service Providers’ product portfolio will help them significantly reduced the software porting and testing effort and shorten their product time-to-market.

  • Support all VDSL2 standards defined in ITU-T G.993.2, G.994.1, G.997.1.
  • MSA compliant hot pluggable electrical interface.
  • Support G.inp (G.998.4) and G.vector (G.993.5).
  • Wide -20°C to 75°C temperature range.

To configure your router to use Proscend/Metanoia PS180T vDSL modem, add a VLAN to the relevant SFP interface with vlan-id selected by the DSL network VPI/VCI parameters according to the following table:

PVC VPI VCI Encapsulation VLAN QoS
1 8 36 LLC 7 UBR
2 8 35 LLC 8 UBR
3 0 35 LLC 2 UBR
4 1 37 LLC 3 UBR
5 0 32 LLC 4 UBR
6 0 33 LLC 5 UBR
7 0 100 LLC 6 UBR
8 8 81 LLC 9 UBR

For example, many Switzerland DSL networks (including NBN) use VPI=8 and VCI=35 which translates to VLAN-ID=8 according to the above table. 

Therefore, to configure your router to operate with most DSL network providers, add vlan to the SFP interface containing the modem module and set vlan-id=8

i.e, assuming SFP module is inserted to SFP1: 

/interface vlan \
    add interface=SFP1 name=vdsl-interface vlan-id=8

Once the VLAN is configured, you can then configure your ISP authentication settings.  e.g:

for PPPoE:

/interface pppoe-client \
    add add-default-route=yes interface=vdsl-interface name=pppoe-out1 \
    user=<isp-username> password=<isp password>



Écrire un avis

Votre nom :

Votre avis : Note : Le HTML n’est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

Développé Par Engitech SA
Propulsé Par Engitech SA
Engitech S.A. © 2021